Auto Reparatur Werkzeug Auto Dent Reparatur Dent Puller Kit

Werkzeuge Auto Reparatur Werkzeug Auto Dent Reparatur Dent Puller Kit 2 in 1 Slide Hammer Reverse Hammer Kleber Tabs Saug tassen



Looking for an effective and easy way to repair dents on your car? Look no further! Introducing our Werkzeuge Auto Reparatur Werkzeug Auto Dent Reparatur Dent Puller Kit 2 in 1 Slide Hammer Reverse Hammer Kleber Tabs Saug tassen. With this dent removal kit, you can say goodbye to costly repairs and hello to a dent-free car.

So, how exactly do you use this dent removal kit without the need for repair kits? It's simple! Just follow these easy steps:

Start by cleaning the dent with a clean, damp cloth. This will ensure that the surface is free from any dirt or debris. Next, assemble the glue in the glue gun and pull the trigger to let the glue stick in the gun. Connect the power source and preheat for 5 minutes to ensure that the glue is ready for use.

Choose the appropriate drawing seal for your dent. Remember, larger dents require larger drawing seals to provide enough drawing force. Apply hot melt glue to the four holes of the gasket. Now, quickly spot the drawing seal with hot melt glue in the center of the dent. Press gently until the glue hardens and sticks. It is important to let the glue cool for about 8 minutes, but make sure the cooling time is less than 10 minutes, especially in winter.

Align the T-shaped repairer and press the drawing seal with hot melt glue. Pull the sliding rod backwards to pull up the dent. You'll be amazed at how easily the dent pops out! After using the dent puller, check the results with a line board. If the dent still exists, you can lightly knock it with a flattening hammer or pen to further flatten it.

Finally, clean the repaired area with a clean, damp cloth to remove any excess glue or residue.

Our dent removal kit is made from high-quality carbon steel and is designed to be durable and long-lasting. With a size of 50CM, it is the perfect tool for car dent repair, dent repair devices, and hail pit repair equipment.

Say goodbye to costly repairs and hello to a dent-free car with our Werkzeuge Auto Reparatur Werkzeug Auto Dent Reparatur Dent Puller Kit 2 in 1 Slide Hammer Reverse Hammer Kleber Tabs Saug tassen. Order yours today and experience the convenience and effectiveness of DIY dent removal!

How to use this dent removal without repair kits
1. clean the dent with a clean, damp cloth;
2. Assemble the glue in the glue gun, pull the trigger to let the glue stick in the glue gun, connect the power source and preheat for 5 minutes;
3. Use a proper drawing seal. Large dent requires a large drawing seal. (Note: the larger the
Drawing seal is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Quickly spot the drawing seal with hot melt glue in the center of the dent, press gently until the glue hardens and sticks (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter);
6. Align the T-shaped repairer and press the drawing seal with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a line board. If dent still exists, knock it lightly with a flattening hammer or pen;
8. Clean the repaired place with a clean, damp cloth.